Rainsaver collection kits: All
of our steel-bodied tanks are supplied with corrugated roofing
sheets (unless otherwise requested). This enables Wimmera Water
Solutions to offer a unique water catchment system from the
roof of the Water Tank. Patented "Rainsaver" caps
are placed at the end of each corrugation to catch the water
off the tank. This system can increase your catchment area by
over 124 sq mtrs (based on AM3G607). In a 500 mm (20") rainfall
area, this means an extra 62,700 litres (13,700 gallons) of
precious rainwater which would otherwise go to waste.
Dust & vermin protection:
Wimmera Water Solutions can protect your stored water from
dust, insects, frogs etc by installing a specially formulated
self adhesive foam strip between the top of the tank wall
and under the corrugated roof sheets. This simple but effective
option helps ensure your precious water is kept pure.
Anti-vortex fittings:
With the large bore outlets generally used for fire service
fittings, the rapid high volume discharge of water can create
a whirlpool or vortex effect if standard fittings are used,
reducing the volume of water that can be extracted.
The anti-vortex fitting prevents this whirlpool effect, and
ensures that the maximum possible water volume is available
to pump-out in emergency situations.
First-flush diverters:
When rain falls on a roof it will wash adhering pollutants
such as dust, soot and bird manure into the storage tank causing
contamination. With leaf debris present, "ponding"
of stagnant water in gutters can occur, making matters worse.
A first-flush diverter ensures that these contaminants are
prevented from entering your tank, assuring you of the cleanest
water possible.
We have several designs of first-flush diverter available,
based on volume measured or flow rate activated. We help you
to choose the right one based on cost and application.
|